Articles
Healthcare

A Green Bill of Health

Healthcare Building Ideas

A Green Bill of Health:

Diagnose the Environmental Sensitivity and Sustainability of Pest Management Practices at Your Facility

By Patrick T. Copps, MS, BCE
Technical Services Manager, Orkin, LLC

 

Today, green is more than the color of spring.  It’s the color patients expect to see applied to every aspect of your operations.  From energy efficiency and water conservation to reducing medical waste, healthcare facilities are under increasing pressure to take more responsibility for their environmental impact and ensure that sustainable practices are in place.

Pest management practices should be on the list of operational activities undergoing “spring greening.”  Through an Integrated Pest Management (IPM) approach, pest management providers are focusing more and more on proactive, preventive measures and using targeted low-impact chemical treatments only as a last resort. This approach is essential in sensitive healthcare environments.  IPM addresses the elements that make your facility attractive to pests – readily available sources of food, water and shelter – and works to reduce pests’ access.  A key component of a green program is thorough documentation, which allows your pest management provider to track trends and proactively take preventive measures.   In an ongoing process of assessment, implementation and monitoring, a good IPM program will continually evaluate pest “hot spots,” allow for adjustments to the program and monitor the results of these modifications.   This process must be sustained to ensure effectiveness.

Experts are exercising their “green thumbs” by using the biology and behavior of pests to develop innovative and environmentally friendly pest management solutions. Combined with a robust preventive strategy, you can control pests’ access to the essentials and use your instincts against theirs.

 

Fly lights

The preparation and storage of food and the trash produced at your facility can provide an open invitation to flies.  Since these insects slough off dangerous bacteria every time they land, eliminating and monitoring for flying insect activity is a critical part of an IPM program. Before “the symptoms” can lead to a chronic problem, install fly lights inside all entrances to help combat flying pests. Fly lights use ultraviolet light to attract and draw pests to a non-toxic sticky board inside a confined trap unit.

Fly lights are best placed inside near entrances to shipping/receiving, food preparation and waste disposal areas.  Not only will fly lights trap the pests before they reach the more sensitive parts of your facility, but the devices also serve as an effective pest-monitoring tool. Have your pest management professional check the trap catch on a weekly basis. For best results, replace the light bulbs quarterly and the sticky boards weekly or as needed.

 

Sticky boards

In foodservice and storage areas, non-toxic sticky boards can help you detect the warning signs of a potential pest infestation by trapping crawling pests. Place sticky boards behind and under equipment in food preparation and storage areas, break rooms and utility closets to help monitor for pest activity in your facility.  Like fly lights, sticky boards can be part of your IPM diagnostics.  Work with your pest management professional to log any pest sightings from the sticky boards to identify the pests caught and make modifications to your IPM program as needed.

 

Pheromone traps and insect growth regulators

An effective way to prevent pests from entering sensitive areas in your facility is to outsmart them with their own biology.  Pheromone traps contain synthetically made versions of chemicals that insects secrete to communicate with one another.  The pheromone draws pests toward a sticky board and offers an easy way to track insect populations, particularly stored-product pests.  Insect growth regulators (IGRs), or lab-created versions of insect hormones, hinder pest growth and prevent reproduction, keeping pest populations from expanding.  IGRs and pheromones are non-toxic to humans and are designed for use in locations where food is stored or prepared.

 

Repellents and desiccants

Pests tend to hide and breed in hard-to-reach cracks and crevices in exterior walls, but you can combat them with small amounts of a repellant dust.  Insects are deterred upon contact with the repellant, which contains pyrethrins, (compounds extracted from pyrethrum flowers), and silica gel, an inorganic compound that damages insects’ exoskeletons through a process called desiccation.  Applications of repellants in cracks and crevices at the edge of exterior walls followed by the use of a sealant will eliminate these popular pest hideouts and help prevent future infestations.

 

Non-volatile baits

If implemented by a licensed pest management professional, non-volatile baits can serve as an effective substitute for traditional treatments.  Non-volatile bait gels and pucks are odorless, so staff and patients won’t be concerned by chemical smells.  They also do not proliferate through the air and won’t affect the indoor air quality.  These targeted bait treatments help eliminate entire pest populations because once an insect consumes the bait, it will carry it back to a harborage area where the rest of the pest population can be affected.

 

Organic cleaners

Organic “green” cleaners that consist of naturally occurring bacteria and enzymes can be used in many sensitive locations and serve as a great pest prevention measure.  Organic cleaners can eliminate grime buildup, residual food debris and mildew found in popular pest hot spots including those present around drains, sinks and waste disposal areas.

 

Exclusion

Another way to prevents pests from getting into your facility is to take a look at the outside.  Have maintenance seal any holes or exposed utility penetrations in your building with weather-resistant sealant.  Cockroaches can enter through a 1/16 inch opening and mice only need a gap the size of a dime.

Installing a half-meter gravel strip around the building can deter both rodents and crawling insects.  Rodents do not like to be out in the open so this will provide a “no-cover” zone.  Also, the gravel creates a rough terrain for insects to traverse.

Keep shrubs and other landscape plants at least two feet away from the building as they can provide food and harborage for termites and crawling insects.  Branches that touch the side of the building or hang over a rooftop can create a bridge for pests, enabling them to crawl over any barriers you’ve created.  Avoid planting fruit-bearing trees as these attract flies, yellow jackets and birds.

Remember, your staff members play a crucial role in your green pest management program.  Teach your employees the importance of environmentally friendly prevention and treatment methods so they can support your efforts to develop a sustainable program.  In addition, special attention should be paid to areas of your facility undergoing renovations or new construction.  These often represent places where pest prevention practices are disregarded, but work zones can provide pests the perfect opportunity to enter your facility unnoticed.  Work with your pest management provider to develop a strategy for areas that are under construction.

Before you put pest management in the less-than-green category, work with your pest management provider to implement a green program that is effective, environmentally responsible and sustainable for the future.

 

Patrick Copps is Technical Services Manager for Orkin’s Pacific Division. A Board Certified Entomologist in urban and industrial entomology, Mr. Copps has more than 35 years experience in the industry. For more information, e-mail Mr. Copps at pcopps@rollins.com or visit www.orkincommercial.com.